There are a lot tricks to make a good diy dildo. Even with a proper penis molding kit, you should get two kits to succeed.
This guide is a result of scouring through hundreds of forum entries and discovering the best tips how to make your own homemade dildo in 2019:
More...
What Is The Best Way To Make High Quality HomeMade dildo?
While you can fool around with your own mixtures or create molding shapes yourself, I would recommend to get something like Clone A Willy kit that's made specifically for this purpose.
If you don't want to spend any money, and you don't want to be able to use the homemade dildo later as actual sex toy, use any ingredients.
First of all, even with all the tips I would recommend to get tow Clone A Willy kits (not kits, but extra molding powder) because it's a new skill…
…and first time might now go 100% right even with all the instructions.
But up to you.
Making a diy dildo can be a super fun thing to do together with your partner… and then use it for double penetration…
- Or it can be a super kinky gift to your girlfriend…
- Or simply a memorabilia 😀
At first I'll explain what Clone A Willy is and how it works…
…then I collected tons of other guy real experiences using Clone A Willy and sharing their best tips how to do it better.
Clone A Willy Review & Buying Tips
First of all, Clone A Willy penis mold kit contains body-safe materials.
The end result will be a silicone dildo with a vibrator.
You can choose between 9 different colors which does include glow in the dark penis mold too 🙂
Clone A Willy costs between ($40–$50), but I do recommend to get extra molding powder ($14) in case you mess up the first one.
It's much cheaper, so you can get few more pieces till you get the perfect replica!
What You Should Know Before Making Your Own HomeMade Dildo?
Preparation upfront will be invaluable!
- Shave all the hair, even the hair on your balls — otherwise the hair will leave marks in the end result.
- Get help if possible — when the molding happens, it's tough to prepare the process and stay hard at the same time. It can be fun activity to do with a partner if you have such option.
- Get a cock ring to combat penis hardness issue — Molding isn't exactly the sexiest thing in the world. Cock ring will help to keep blood in penis and make it extra girthy for those few precious minutes
- Think of the process as playful denial — your mental attitude is important. Don't think “OMG, how do I stay hard for 90 seconds…?” Edge, fool around, get yourself super excited, watch some porn as you're making the mold. Make a game out of it.
- Don't ejaculate few days before — Ideally you would do it when you're feeling super horny. Then you'll need little stimulation to get excited. Nofap will help.
Pro Tip: By the way you can also cast your dick in chocolate and then give it to your partner as the most delicious and funny thing ever! 🙂
As for the process itself it's more helpful to watch than read to understand how it works.
Watch this video to understand exactly how to do mixing & molding process right:
How To Successfully Mould DIY Dildo & Maintain Rock Hard Penis
Okay, now I've collected other people success or failure stories that you can learn from.
Tons of great tips with the stories how they made it fun and exciting.
“A cock ring and porn.”
“I made it by myself for my girl so I had to have porn on the whole time and had to keep tugging it to stay hard.
Mixing stuff together isn’t exactly sexy times.
Once the mold is poured and you put yourself in it you only need to remain hard for a minute, so just make sure your favorite video/scene/whatever is queued up for that moment.”
Source: Yarzospatflute
“My wife and a cock ring did it for me.”
“She dressed up super slutty, just how I like.
We put porn on the TV. She sucked me off till I was hard, and started mixing ingredients.
Sucked me off some more and I jammed my dick in the mold.
While in there, I watched porn, sucked on her titties, and fingered her while she talked dirty to me.
That did it. Hahahaa.
I was so hard it was tough to get out of the mold.
But it came out great.
We use it when she wants to get double-stuffed.
I’ll jam my dick in her mouth, clone in her pussy, then I lick her pussy at the same time.
Good times are had by all!!!”
Source: ThrowAwayDerpityDerp
“Cock ring + Keep squeezing (kegels) while you’re in the mold.”
“That and the cock ring should make you a bit bigger than normal, or about the same as when you are rock hard.
I did both of those and mine came out exactly like I am when I’m as hard as I get.
As a side note, I found it really weird to be holding my dick in my hand as a dildo.
It came out so life-like.
I also wanted to show and tell everyone I know, but it’s not exactly the kind of thing you do that with.”
Source: Yarzospatflute
Pro Tips On How To Make A Dildo Using Moulding Kit
“Protips from an artist and sex connoisseur for your Clone A Willy!”
- “Get really hard. Rock hard. Think about the hottest fantasy you can.
- Put a cock ring on the base of your dick to trap all that erection-y goodness. Still keep up the fantasy in your head. We’re talking that go-to thing that makes your knees weak.
- Rub oil on your dick. This will help it release MUCH easier.
- If you’re alone and doing this, sitting on a chair so you can rest your arms is a good idea to hold it steady and to prevent any air bubbles.
- When the silicone is mixed into the container, give it a bunch of hard thunks on the counter/table/hard surface, much like you would cake batter, to get any bubbles to rise to the surface so you can pop them/get rid of them.
- Slide your dick in relatively slowly into the silicone casting mixture. Fast movement causes air bubbles. So, don’t let the silicone casting mixture cure while you’re moving or anything, but definitely don’t just try and shove it in like you’re trying to beat a land speed record.
Most of all…have fun!
It’s an awesome, funny, and hot gift, especially if you’re long-distance with your SO. 😀
There’s two parts to Clone-A-Willy.
The silicone mix, and the casting mixture.
Number 5 applies to both though, the casting mixture needs some thunks, and then after you pour in the silicone, give that a few good thunks as well.”
Source: AndItAllGoesAway
The results:
“So I made a homemade dildo with my ex and from a first hand experience and also some post making reflections here are some tips:”
- “If you want to make it as big as possible (like this huge dildo) and worried about staying hard — masturbate, use a cock ring or if you have one a penis pump. It’s not essential but will help your penis look it’s best and allow you to stay hard for the period. Also like somebody mentioned, watch open while it’s ‘setting’.
- It’s a 2 people job!!! Lol. We did it together and even then it didn’t go all that great and turned out a bit wonky and indented. I later read an article which had a great hack: Instead of pouring the solution into the tube and inserting your penis into it, some guy cut the top of the tube off, placed it tightly against his pubic bone with the penis inside (make sure it’s tightly against the skin to prevent leakage) and then poured the solution on top! Haven’t tried it the 2nd time but it sounds like it would have been easier.
- Stay off meds if you can. They can have serious side effects and you may end up with an unwanted erection for a lot longer than expected.
- You could give it to your GF before you make it and then turn it into an intimate activity that the 2 of you can do together. It is a right laugh! Nothing says I love you like sticking your sick in a tube of silicone for your SO 😉
- I would suggest getting a dust sheet or an old towel or lay some newspapers… I still have a silicone stain next to my bed! Have fun and let us know how it went!”
Source: CocoPop44
“Temperature is critical.”
“The first time I did one the water was too hot and the mold set almost instantly, before I could put my willy in.
And do it over some newspaper or something, makes cleanup easier.
I also used a cock ring.”
Source: Yarzospatflute
Challenges With Making a HomeMade Dildo
“I’ve tried a few different kits and these things have never worked for me.
It’s basically the least sexy experience I’ve ever had to try and concentrate on holding a boner through.
You have some powder to mix with water and once you mix it it starts to set immediately so you need to get hard first before mixing the powder with water in a mixing bowl.
You than need to stay hard while you transfer the gelatinous liquid from the bowl to the plastic tube for the mold.
If you’ve gotten that far and managed to maintain your hard on you now need to stick your boner in what feels like cold pudding and hold that boner for at least ten to fifteen minutes or the mold won’t turn out right.
If your dick shrinks at all that’s what the end resulting mold will look like.
I tried multiple times but keeping it up while doing the equivalent of a elementary school science experiment, and than sticking my dick in it, has proved impossible.
Maybe it’s just me. Good luck.”
Source: SpudzMakenzy
“I made two dildos using Clone A Willy kit, one on my own and one with assistance.”
On my own it was too difficult to stay hard and do all the mixing at the same time, plus I was live streaming it to my friends for laughs and they were pretty distracting as well.
Turned out not great.
The second time I had my gf go down on me while I did the mixing and that was much better, although if we had done a third one I would have made her do the mixing while I just kept myself hard.
The second one came out almost perfect.
This was all a few years ago but I don’t remember needing to stay hard after insertion being a major issue.
The gel they provide sets so quickly I feel like I was able to pull out in under a minute before letting it finish setting on its own.
Anyway pics of results!
To the left the first attempt, to the right the second attempt:
Source: Petshopbrian
“I attempted to make diy dildo and had a problem with the molding gel setting too fast, me staying hard, etc.”
“I then bought some alginate online, which was less expensive than a refill from clone-a-willy, and used a cock ring and a penis pump to get and stay hard.
Then, using colder water when mixing the molding gel increases the set time, so there’s no rush getting positioned correctly.
Worked like a charm.
10/10 would clone again.”
Source: zymurgist69
Results and story of making a homemade dildo
“It worked very well as a tool to duplicate my erection, though be prepared to be slightly underwhelmed by the results in terms of ‘aaaw, I thought it’d be more impressive!’.
If you’re about 7" stem-to-stern then depending on scrotal response (how much your balls draw up and get in the way when you take the molding) and how thick your pubic fat pad is, expect to get more like 5", maybe 5.5" of usable dildo out of the project.
Or perhaps I’m just deluding myself and my Weiner is a bit weeny 🙂
However, as a working dildo, they leave a lot to be desired (though ours does have an effectively little vibrator molded into the base) as the finished product was extremely hard rubber-y stuff.
Any surface imperfections during the molding and casting process will tend to lead to rough spots on the finished product.
If I were doing it again, I wouldn’t bother with the vibrator, I’d mount a long wooden dowel on a little plinth and set that in the curing rubber instead to create a phallic objet d’art.
Pro-tip: insofar as humanly possible, keep air bubbles out of all the mixtures; they will cause havoc with the surface finish.
I should see if I can find the damn thing and take a picture of it. Meta-exhibitionism!”
Source: NeedlesslyD
Bringing It All Together
Definitely do try it…
It's a fun, sexy game to do with a partner 🙂
If you make it entertaining and playful then the process itself will be cool!
For the negative reviews I've heard it was when people didn't do the research upfront, were overwhelmed doing it all themselves… and they tried only once… 🙂
Technically after you have the molding kit you can make as many chocolate penises as you want! 😀